CVA Frontier Rifle, .45 caliber, 28" barrel, percussion, beech, brass, used, from a kit by Connecticut Valley Arms

Home > Guns > Percussion guns > Percussion rifles

CVA Frontier Rifle,
.45 caliber, 28" barrel,
percussion, beech, brass,
used, from a kit by Connecticut Valley Arms

Part Number:	AAW-308
Availability:
Price:	$265.00
Order Quantity:

Assembled from a kit, this CVA Frontier Rifle is stocked in beech, finished as cherry, and is trimmed in brass furniture. The stock has many scattered handling marks and shows wear in the finish from use. The bore of this rifle is bright and has been well maintained. This .45 caliber rifle is short, light, and will be handy to carry in the deep woods. The trigger reach is 13-1/2" for today's average size shooter, and this rifle weighs 7.4 pounds.

The .45 caliber 28" by 15/16" straight octagon barrel is rifled with a 1:48 twist for a patched round ball. The barrel is fitted with a long rear sight that is screw adjustable for elevation. A brass blade front sight set in an iron base is dovetailed behind the muzzle. The bore is bright, and is ready to shoot. The barrel exterior was cold blued to a silvery gray. The factory information is stamped on the left oblique flat near the breech. We recommend our .440" Hornady pure lead round ball, with .015" dry patches, lubricated with our Mink Oil Tallow patch lubricant, over 60 grains of GOEX FFg black powder, and a No. 11 percussion cap.

The beech stock is finished to a deep cherry red. The stock has many scattered handling marks and wear in the finish. The brass has aged to a mellow patina from use. A simple brass buttplate without a comb is fitted to help absorb the recoil from the .45 caliber bore. We note a leather spacer was used between the buttplate and the stock. The short tang anchors the hooked breech, and a steel key retains the barrel, for simple cleaning. It is easy to remove the barrel and clean it with hot soapy water, dry, oil, and re-assemble. The brass triggerguard is shaped with a grip rail, and has developed a mellow patina to match the rest of the brass found on this rifle. A brass forend cap protects the end grain of the stock and acts as the ramrod entry pipe. The wooden ramrod is fitted with a brass loading tip. The opposite end is fitted with a brass tip threaded to accept 10-32 cleaning and loading accessories. No cheek is formed on this rifle. The lock is retained with two bolts that pass through simple brass washer style sideplates that are surface mounted on the side panel.

Ignition is provided by a Maslin style percussion lock with engraved plate, hammer and color case hardened finish. A drum and Hot Shot steel nipple are fitted to barrel, the nipple is a 6-1mm thread. Order our nipple #CVA-S should you need a spare. Fitted with a double set trigger that can be tuned to the exact trigger pull you desire. These triggers are properly tuned to fire from the set or unset position. This is a nice feature being quite versatile when using the gun for target or hunting.

This CVA Frontier Rifle was finished from a kit and has a bright well maintained bore. This no frills utilitarian rifle will be perfect for you next big game hunt. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.440" round balls, pure lead, Hornady, per 100

Part Number:	BALL-440
Availability:
Price:	$13.49
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Ball puller, steel screw, .45 caliber brass collar, 10-32 thread

Part Number:	BP-45-10
Availability:
Price:	$3.89
Order Quantity:

Bore brush, bronze, for .45 caliber, 10-32 thread

Part Number:	BRUSH-45-10
Availability:
Price:	$4.29
Order Quantity:

Nipple, 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, #11 CCI cap, stainless steel

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	CVA-S
Availability:
Price:	$4.99
Order Quantity:

Powder Flask, brass body, brass dispensing valve, embossed Diamond or Basket Weave pattern accepts 10-1mm threaded spouts

Part Number:	FLASK-DIAMOND
Availability:
Price:	$57.99

Flush Nipple, 6-1mm thread for Spanish rifles, stainless steel, 1/4" square shank for nipple wrench, with tubing, fits CVA, Jukar, Traditions, Ardessa, Dikar

Part Number:	FLUSH-CVA
Availability:
Price:	$4.99
Order Quantity:

Fouling Scraper, flat face, brass, .45 caliber, 10-32 thread

Part Number:	FS-45-10
Availability:
Price:	$4.09
Order Quantity:

Jag, jagged cleaning tip, brass, .45 caliber, 3/8 rod, 10-32 thread

Part Number:	JS-45-6-10
Availability:
Price:	$4.59
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$20.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59

Shooting patches, .015" cotton, .40 - .49 caliber, per 100, dry

Part Number:	OX-15-40-D
Availability:
Price:	$4.99
Order Quantity:

Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber

Part Number:	OX-CLEAN-45C
Availability:
Price:	$4.49
Order Quantity:

Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread Ramrods cannot be send to a P O Box.

Part Number:	RAMROD-6-10-B
Availability:
Price:	$18.99
Order Quantity:

Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber.

Part Number:	ST-6
Availability:
Price:	$8.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Percussion guns > Percussion rifles