Ketland Trade Pistol .62 caliber smoothbore, 8" tapered round barrel, L&R flintlock, walnut, brass trim, used, by K. Lincavage

Home > Guns > Flintlock guns > Flintlock pistols

Ketland Trade Pistol
.62 caliber smoothbore, 8" tapered round barrel,
L&R flintlock, walnut, brass trim,
used, by K. Lincavage

Part Number:	AAW-229
Availability:
Price:	$1,559.00
Order Quantity:

Trade pistols were a popular item during the Fur Trade. This replica Ketland trade pistol is stocked in black walnut with a warm even brown tone. The polished brass furniture has a bright appearance and nicely compliments the tone of the stock. The tapered flared barrel is finished bright to match the finish on the L&R flintlock. Hand assembled by builder Kenneth Lincavage. This pistol has a few marks on the frizzen face, but otherwise appears unfired.

The 8" tapered round barrel has a slight flare at the muzzle. The .62 caliber bore is bright in as-new condition. The exterior of the barrel is finished armory bright and will develop to a silver patina with use. No sights are fitted in trade pistol, or dragoon pistol style, where they were intended to be used at close range.

Finished bright to match the barrel, the L&R flintlock has a crisp action and a well hardened frizzen. When using our best 3/4" knapped English gun flints, #FLINT-ENG-6, the lock will throw a shower of sparks into the pan. A direct drilled vent hole is well centered and positioned at the top edge of the pan to provide best ignition.

Viewed from above the breech end of the barrel is fitted with a rounded flared tang. A neatly indexed tang bolt engages the triggerplate below. The lock panels taper widest at the rear in 18th and early 19th century style. Viewed from the bottom the triggerguard is correctly mounted with pins. The rear extension has been neatly inlet into the pistol grip. All of the brass furniture has been polished and will acquire a natural patina with use and handling. The ramrod pipes are shaped with raised rings and a thumbnail skirt on the entry pipe. The tapered ramrod has a flared brass tip with no provisions for threaded accessories. We recommend using a pistol loading rod, our #PL-7-62, and leaving this well fitted ramrod with the pistol. Two domed head lock bolts secure the L&R flintlock. The sideplate is a classic early 1800's flush mounted design with a British military influence.

Neatly fitted and finished this light weight Ketland style trade pistol with its' early 19th century styling, will be a delight to carry at the rendezvous, an historical event, or as a trusted companion when trekking through the woods. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

.600" round balls, pure lead, hand cast, per 25

Part Number:	BALL-600-X
Availability:
Price:	$15.49
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

French amber gun flint, 3/4 x 7/8" for standard rifle, large Siler, L&R, most others. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-AMBER-6
Availability:
Price:	$3.00

Powder Measure, 30 grains of FFFg black powder, solid brass, made in the USA.

Part Number:	M-030
Availability:
Price:	$5.99
Order Quantity:

Powder measure, brass, adjustable 0 to 50 grains, without spout

Part Number:	MA-050
Availability:
Price:	$15.99
Order Quantity:

Folding Lead Ladle, hand forged, blued steel, folds to 5-1/4" length

Part Number:	MOLD-BAG-LADLE
Availability:
Price:	$24.50
Order Quantity:

Shooting patches, .010" cotton, .60 - .69 caliber, per 100, wonder-lube

Part Number:	OX-10-60-W
Availability:
Price:	$6.39
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Pistol loading rod and short starter with .62 caliber cleaning jag, 7/16" diameter hickory rod, 10-32 threads, 12" overall usable length including .62 caliber cleaning jag

Part Number:	PL-7-62
Availability:
Price:	$21.58
Order Quantity:

Thomas Pickering's Tool, for flint rifles & pistols, the first U. S. issue gun tool, designed by our first U. S. Quartermaster

Part Number:	TOOL-PICK-S
Availability:
Price:	$11.99
Order Quantity:

Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.

Part Number:	TOOL-VISE-DX
Availability:
Price:	$39.99

Patch puller, primitive corkscrew worm, small, steel, fits plain rod

Part Number:	WORM-PR-S
Availability:
Price:	$1.99
Order Quantity:

Top of Page Home > Guns > Flintlock guns > Flintlock pistols