Lock, Back Action right hand, percussion, by L&R
Part Number: LOCK-LR-700
Availability: In Stock
Price: $160.00
Order Quantity:
Called “back action” because the mainspring hangs behind the tumbler, this lock was popular on percussion guns made in St. Louis, New York, California, Ohio, England and Belgium. Swivel breech double rifles require a back action lock mechanism. This lock can be modified for flint use. Side-by-side or over-and-under double rifles, shotguns, and combination guns often use back action locks.

Makers of bench rifles, target rifles, slug guns and Sniper’s rifles of the 1840 to 1880 preferred these long thin locks.

These nice locks feature a fly detent, for use with set triggers. The mainspring and stirrup result in fast lock time, making this lock a good choice for the serious target shooter.

The hammer has a 1.625” throw for use with barrels from 13/16” up to 1-1/4”. Our left back action lock exactly matches our right lock. Notched at the tail to hook under a wood screw, we recommend that you use our #6 x 1/2” screw, set permanently in the lock mortise.

Strangely, some original back action locks are much different inside, with the mainspring along the bottom, hooking a link mounted at the front of the tumbler. This odd geometry permitted using a conventional sear spring. But sear placement is always the same.

Faced with the task of repairing rotted out right and left locks on a Belgian double shotgun that is otherwise serviceable, it may be easier to simply trim these lock plates to fit the existing mortise, or inlet these new locks. Retrofitting new locks is a gunsmithing challenge since hammers may need to be bent, shortened, stretched, or you may refit your original hammers.

This lock exactly matches our left hand back action percussion lock.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Adobe Reader required to view the files below.
Get Adobe Reader
page_190.pdf Last updated:4/25/2012 (100 KB)
Bridle, wax cast steel, tempered, use 6-40 screws
Bridle, wax cast steel, tempered, use 6-40 screws
Part Number: LOCK-LR-100-BR
Availability: In Stock
Price: $24.00
Order Quantity:
Bridle screw, 6-40 thread
Bridle screw, 6-40 thread
Part Number: LOCK-LR-100-BX
Availability: In Stock
Price: $3.29
Order Quantity:
Fly detent, steel, tempered, with hole for pivot
Fly detent, steel, tempered, with hole for pivot
Part Number: LOCK-LR-100-FL
Availability: In Stock
Price: $5.00
Order Quantity:
Sear spring screw, 6-40 thread
Sear spring screw, 6-40 thread
Part Number: LOCK-LR-100-SSX
Availability: In Stock
Price: $3.29
Order Quantity:
Sear screw, .59" length, 6-40 thread
Sear screw, .59" length, 6-40 thread
Part Number: LOCK-LR-100-SX
Availability: In Stock
Price: $3.29
Order Quantity:
Tumbler screw, .400" head diameter, 6-40 thread
Tumbler screw, .400" head diameter, 6-40 thread
Part Number: LOCK-LR-100-TX
Availability: In Stock
Price: $5.25
Order Quantity:
Hammer, 1.625" throw
Hammer, 1.625" throw
Part Number: LOCK-LR-300-HA
Availability: In Stock
Price: $25.50
Order Quantity:
link and pin, short, for back action
link and pin, short, for back action
Part Number: LOCK-LR-700-LI
Availability: In Stock
Price: $13.50
Order Quantity:
Mainspring, tempered steel, inverted
Mainspring, tempered steel, inverted
Part Number: LOCK-LR-700-MS
Availability: In Stock
Price: $36.00
Order Quantity:
lock plate, 4.7" x 1.0", drilled & tapped
lock plate, 4.7" x 1.0", drilled & tapped
Part Number: LOCK-LR-700-PL
Availability: In Stock
Price: $45.00
Order Quantity:
sear, tempered, use 6-40 screw
sear, tempered, use 6-40 screw
Part Number: LOCK-LR-700-SE
Availability: In Stock
Price: $24.00
Order Quantity:
sear spring, flat style, tempered
sear spring, flat style, tempered
Part Number: LOCK-LR-700-SS
Availability: In Stock
Price: $6.00
Order Quantity:
tumbler, tapped 6-40, cut for fly
tumbler, tapped 6-40, cut for fly
Part Number: LOCK-LR-700-TU
Availability: In Stock
Price: $34.50
Order Quantity:
Mainspring Vise,
to safely compress a mainspring
Mainspring Vise, to safely compress a mainspring
Part Number: TOOL-VISE
Availability: In Stock
Price: $22.99
Order Quantity:
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.
Part Number: TOOL-VISE-DX
Availability: In Stock
Price: $39.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards