English Durs Egg - London left Percussion Conversion Lock, by L&R
Part Number: LOCK-LR-3500
Availability: In Stock
Price: $160.00
Order Quantity:
Durs Egg - London left Percussion Conversion Lock

Best quality London made flint locks were often converted to percussion, during the 1825 - 1840 transition period. This nice percussion lock has the plate style of an earlier flint lock, with a notch for a 1/2" powder drum and nipple.

A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4” to 1-1/8” octagon at the breech.

Notice the “cut away” tumbler and “swing out” link, which greatly simplify lock disassembly. These are fine English innovations. This tumbler has a lower arm, made to catch the mainspring if the tumbler arm or link should break while being cocked. But even if this “weakest link” has failed, this fine lock will fire one last shot. You can depend on this nice lock, in good weather or bad, to spark well. English rifles fitted with such a fine lock invariably have a flash hole liner fitted, for fastest ignition. Refer to our reprint of Henry Nock’s Patent Breech patent drawings for details of original flash hole construction.

The lock plate is polished bright inside. Exterior parts are grit blasted to a matte gray.

This lock exactly matches our right hand Durs Eggpercussion lock.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Adobe Reader required to view the files below.
Get Adobe Reader
page_173.pdf Last updated:4/25/2012 (104 KB)
Powder drum, 7/16" diameter, 5/16-24 thread, not drilled for nipple
Powder drum, 7/16" diameter, 5/16-24 thread, not drilled for nipple
Part Number: DRUM-7-5-F-N
Availability: In Stock
Price: $4.59
Order Quantity:
Fly detent, steel, tempered, with hole for pivot
Fly detent, steel, tempered, with hole for pivot
Part Number: LOCK-LR-100-FL
Availability: In Stock
Price: $5.00
Order Quantity:
Stirrup link, wax cast steel, tempered, integral pins
Stirrup link, wax cast steel, tempered, integral pins
Part Number: LOCK-LR-100-LI
Availability: In Stock
Price: $13.50
Order Quantity:
Sear spring screw, 6-40 thread
Sear spring screw, 6-40 thread
Part Number: LOCK-LR-100-SSX
Availability: In Stock
Price: $3.29
Order Quantity:
Tumbler screw, .400" head diameter, 6-40 thread
Tumbler screw, .400" head diameter, 6-40 thread
Part Number: LOCK-LR-100-TX
Availability: In Stock
Price: $5.25
Order Quantity:
sear spring, left, die formed steel, tempered
sear spring, left, die formed steel, tempered
Part Number: LOCK-LR-200-SS
Availability: In Stock
Price: $6.00
Order Quantity:
Bridle & sear screw, .625" length, 6-40 thread
Bridle & sear screw, .625" length, 6-40 thread
Part Number: LOCK-LR-1100-BX
Availability: In Stock
Price: $3.29
Order Quantity:
sear, left, wax cast steel, tempered use 6-40 screw
sear, left, wax cast steel, tempered use 6-40 screw
Part Number: LOCK-LR-1800-SE
Availability: In Stock
Price: $24.00
Order Quantity:
tumbler, left, wax cast steel, tempered, cut for fly, tapped 6-40
tumbler, left, wax cast steel, tempered, cut for fly, tapped 6-40
Part Number: LOCK-LR-1800-TU
Availability: In Stock
Price: $34.50
Order Quantity:
bridle, left, wax cast steel, use 6-40 screws
bridle, left, wax cast steel, use 6-40 screws
Part Number: LOCK-LR-3100-BR
Availability: In Stock
Price: $24.00
Order Quantity:
Mainspring, left, tempered steel, tempered
Mainspring, left, tempered steel, tempered
Part Number: LOCK-LR-3100-MS
Availability: In Stock
Price: $36.00
Order Quantity:
hammer, left, wax cast steel, 1.625" throw, percussion
hammer, left, wax cast steel, 1.625" throw, percussion
Part Number: LOCK-LR-3500-HA
Availability: In Stock
Price: $25.50
Order Quantity:
plate, left, wax cast steel, .94" x 5.1", cut for 7/16" drum
plate, left, wax cast steel, .94" x 5.1", cut for 7/16" drum
Part Number: LOCK-LR-3500-PL
Availability: In Stock
Price: $45.00 Closeout
Order Quantity:
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
Cone length 0.440"Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307"
Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel
  • Cone length 0.440"
  • Overall length: 0.635"
  • Thread journal length: 0.195"
  • Diameter of base: 0.307"
Part Number: RST-S
Availability: In Stock
Price: $4.99
Order Quantity:
Mainspring Vise,
to safely compress a mainspring
Mainspring Vise, to safely compress a mainspring
Part Number: TOOL-VISE
Availability: In Stock
Price: $22.99
Order Quantity:
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.
Part Number: TOOL-VISE-DX
Availability: In Stock
Price: $39.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards