Early Ketland Flint Lock, by Jim Chambers
Part Number: LOCK-EK-FR
Availability: In Stock
Price: $295.00
Order Quantity:
Early Ketland Flint Lock

This flat faced English flint lock is made in the style of the early work of Thomas Ketland, for use on traditional American longrifles and English fowling guns of the 1750-1780 era. Unmarked, you might engrave KETLAND in block letters ahead of the cock, as many old locks were marked. A few locks also had simple floral engraving.

At 5.90" x .93", this lock is a bit larger than the Siler flint lock, notice that this lock has no chamfered edge. The lock plate is made to be inlet flush with the wood. Unlike Germanic locks, no moulding is filed across the tail of the plate. The pan is rounded, not octagon. This pan has no bridle arm, typical of early English locks. A shouldered screw serves as a pivot and support for the frizzen. The frizzen spring has a spade point finial, and a front mounting screw. The cock points sparks directly into the pan.

Internally, the plate is polished bright. The tumbler and sear have raised bearing rings turned around the axles, to minimize friction. Surefire, this lock has a fly detent, to allow set triggers, if desired.

This large flint lock is recommended for early longrifles with straight or swamped octagon barrels of 7/8" to 1-1/8" size at the breech.

Cock this lock, and notice the pre-loaded heavy mainspring rides on a cam-action tumbler ramp. This gives the lock a light release, increasing in speed through the stroke, due to increasing leverage. The frizzen tightly covers the pan. As you disassemble this lock, you will feel the tumbler and screws snugly fitted to reamed holes in the bridle and plate. Parts turn smoothly, with no wobble or binding. Designed by Mr. Jim Chambers, this flat faced flint lock is modelled after an early original by Ketland. Order this lock for your next longrifle of fowler. We really like this nice flint lock.

We recommend that you order a dozen Flint-#ENG-7 English 7/8" gun flints, too.

This lock is shown at exact-full-size, in Track's new catalog for gunmakers and gunsmiths.
Adobe Reader required to view the files below.
Get Adobe Reader
page_156.pdf Last updated:4/25/2012 (96 KB)
English gun flint, 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
English gun flint, 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
Part Number: FLINT-ENG-7
Availability: In Stock
Price: $3.50
Order Quantity:
Bridle, wax cast steel, as cast, to drill in place
Bridle, wax cast steel, as cast, to drill in place
Part Number: LOCK-EF-FR-BR
Availability: In Stock
Price: $14.00
Order Quantity:
Bridle screw, .630" length, .265" head, 8-32 thread
Bridle screw, .630" length, .265" head, 8-32 thread
Part Number: LOCK-EF-FR-BX
Availability: In Stock
Price: $3.99
Order Quantity:
Fly detent, wax cast steel, tempered
Fly detent, wax cast steel, tempered
Part Number: LOCK-EF-FR-FL
Availability: In Stock
Price: $15.00
Order Quantity:
Frizzen spring screw, .670" length, 8-32 thread
Frizzen spring screw, .670" length, 8-32 thread
Part Number: LOCK-EF-FR-FSX
Availability: In Stock
Price: $3.99
Order Quantity:
Mainspring, wax cast steel, tempered
Mainspring, wax cast steel, tempered
Part Number: LOCK-EF-FR-MS
Availability: In Stock
Price: $25.50
Order Quantity:
Sear, wax cast steel, tempered, use 8-32 screw
Sear, wax cast steel, tempered, use 8-32 screw
Part Number: LOCK-EF-FR-SE
Availability: In Stock
Price: $25.50
Order Quantity:
Sear spring, die formed steel, tempered, long upper arm
Sear spring, die formed steel, tempered, long upper arm
Part Number: LOCK-EF-FR-SS
Availability: Out of Stock, request notification when available.
Price: $17.00
  
Sear spring screw, .460" length, 8-32 thread
Sear spring screw, .460" length, 8-32 thread
Part Number: LOCK-EF-FR-SSX
Availability: In Stock
Price: $3.99
Order Quantity:
Sear screw, .645" length, 8-32 thread
Sear screw, .645" length, 8-32 thread
Part Number: LOCK-EF-FR-SX
Availability: In Stock
Price: $3.99
Order Quantity:
Top jaw screw, fancy, slotted, 1/4-20 thread, for English Fowling Gun flint lock, by Jim Chambers
Top jaw screw, fancy, slotted, 1/4-20 thread, for English Fowling Gun flint lock, by Jim Chambers
Part Number: LOCK-EF-FR-TJX
Availability: In Stock
Price: $7.99
Order Quantity:
Tumbler, wax cast steel, tempered, cut for fly
Tumbler, wax cast steel, tempered, cut for fly
Part Number: LOCK-EF-FR-TU
Availability: In Stock
Price: $33.00
Order Quantity:
cock, 1.67" throw, wax cast steel, tapped 1/4-20 thread
cock, 1.67" throw, wax cast steel, tapped 1/4-20 thread
Part Number: LOCK-EK-FR-CO
Availability: In Stock
Price: $41.50
Order Quantity:
frizzen, wax cast steel, as cast, temper after fitting
frizzen, wax cast steel, as cast, temper after fitting
Part Number: LOCK-EK-FR-FR
Availability: In Stock
Price: $20.00
Order Quantity:
frizzen spring, point finial, front mount, for 8-32 screw
frizzen spring, point finial, front mount, for 8-32 screw
Part Number: LOCK-EK-FR-FS
Availability: In Stock
Price: $25.50
Order Quantity:
frizzen screw, shouldered for pan without bridle, .79" long, 10-32 thread
frizzen screw, shouldered for pan without bridle, .79" long, 10-32 thread
Part Number: LOCK-EK-FR-FX
Availability: In Stock
Price: $3.99
Order Quantity:
top jaw, wax cast steel, .82" x 1.00" with alignment stud
top jaw, wax cast steel, .82" x 1.00" with alignment stud
Part Number: LOCK-EK-FR-TJ
Availability: In Stock
Price: $18.00
Order Quantity:
Tumbler screw, .5" diameter head, 8-32 thread
Tumbler screw, .5" diameter head, 8-32 thread
Part Number: LOCK-GA-FR-TX
Availability: In Stock
Price: $4.99
Order Quantity:
Mainspring Vise,
to safely compress a mainspring
Mainspring Vise, to safely compress a mainspring
Part Number: TOOL-VISE
Availability: In Stock
Price: $22.99
Order Quantity:
Mainspring Vise,
deluxe English style,
for safely compressing a mainspring,
made in the U.S.A.
Mainspring Vise, deluxe English style, for safely compressing a mainspring, made in the U.S.A.
Part Number: TOOL-VISE-DX
Availability: In Stock
Price: $39.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards