Thompson Center Hawken Rifle .54 caliber, 28" barrel, walnut stock, brass trim, used, by Thompson Center Arms

Home > Guns > Brand name factory finished guns > T/C - Thompson Center Arms - Rochester, New Hampsire, USA

Thompson Center Hawken Rifle
.54 caliber, 28" barrel,
walnut stock, brass trim, used,
by Thompson Center Arms

Part Number:	AAW-335
Availability:
Price:	$299.00
Order Quantity:

ThIs Thompson Center Hawken Rifle is used with scattered marks on the stock, brown speckles on the blue, and patina on the brass furniture. The early style percussion lock with erect hammer color case hardening is aging to a brown patina. With an overall weight of 9.1 pounds and a trigger reach of 14", this rifle is perfectly suited for today's average to larger size shooters.

The heart of the rifle is the T/C .54 caliber barrel. Measuring 28" in length the barrel blue is turning brown and has the later Thompson Center sights. The front sight is a blued steel bead with a appropriate elevation and windage adjustable rear sight. The bore is mostly bright, but does have some scattered dark spots. You can feel the areas have a slight resistance with a tight cleaning patch, but it does not tear the patch.

Stocked in a nice piece of straight grain walnut the stock has scattered handling marks. The brass furniture has a mellow patina. Then top view sows the hooked breech, which allows the barrel to be easily dismounted. Simply remove the single wedge key forward and below the barrel, put the lock into the half-cock position, remove the ramrod and lift the barrel out for easy cleaning. The polished brass triggerguard has a wide bow for the double set triggers. The ramrod is fitted with 10-32 threaded brass tips for loading and cleaning accessories. A brass sideplate surrounds the single bolt. Further back on the rifle the beaver tail cheek can be seen, standard issue on T/C rifles.

Ignition for the rifle is provided by this large T/C percussion lock. The lock is color case hardened and has aged to a silvery gray patina. It also has the factory engraving found on most Thompson Center locks. Below the lock a set of double lever, double set triggers has been installed. Properly tuned and adjusted the triggers can be used set or unset. When set the trigger pull is quite light, unset it is a touch heavier around 4 or 5 pounds.

In used condition with a well aged appearance. The bore is mostly bright, but does have scattered speckling. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

.530" round balls, pure lead, Hornady, per 100

Part Number:	BALL-530
Availability:
Price:	$24.99
Order Quantity:

.530" round balls, pure lead, hand cast, per 50

Part Number:	BALL-530-X
Availability:
Price:	$15.49
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Ball puller, steel screw, .54 caliber brass collar, 10-32 thread

Part Number:	BP-54-10
Availability:
Price:	$3.99
Order Quantity:

Bore brush, bronze, for .54 caliber, 10-32 thread

Part Number:	BRUSH-54-10
Availability:
Price:	$4.29
Order Quantity:

Powder Flask, brass body, brass dispensing valve, embossed Diamond or Basket Weave pattern accepts 10-1mm threaded spouts

Part Number:	FLASK-DIAMOND
Availability:
Price:	$59.99
Order Quantity:

Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center

Part Number:	FLUSH-RST
Availability:
Price:	$4.99
Order Quantity:

Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread

Part Number:	FS-54-10
Availability:
Price:	$4.29
Order Quantity:

Jag, jagged cleaning tip, brass, .54 caliber, 7/16" rod, 10-32 thread

Part Number:	JS-54-7-10
Availability:
Price:	$5.09
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$22.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59

Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry

Part Number:	OX-15-50-D
Availability:
Price:	$4.99
Order Quantity:

Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry

Part Number:	OX-18-50-D
Availability:
Price:	$5.29
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread Ramrods cannot be send to a P O Box.

Part Number:	RAMROD-6-10-B
Availability:
Price:	$18.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	RST-I
Availability:
Price:	$4.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel

Cone length 0.440"
Overall length: 0.635"
Thread journal length: 0.195"
Diameter of base: 0.307"

Part Number:	RST-S
Availability:
Price:	$4.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Brand name factory finished guns > T/C - Thompson Center Arms - Rochester, New Hampsire, USA