Thompson Center Renegade Hunter, .50 caliber, 26" barrel, percussion, walnut stock, iron trim, single trigger, used, by Thompson Center Arms

Home > Guns > Percussion guns > Percussion rifles

Thompson Center Renegade Hunter,
.50 caliber, 26" barrel,
percussion, walnut stock, iron trim, single trigger,
used, by Thompson Center Arms

Part Number:	AAW-333
Availability:
Price:	$549.00
Order Quantity:

This .50 caliber Thompson Center Renegade Hunter is designed with a single trigger with a wide trigger bow for cold weather hunting. Trimmed in iron furniture the factory finished black walnut stock shows a few minor handling marks. The bore is bright, clean, and has been well maintained. Trigger reach is 13" and this rifle weighs 8.3 pounds. This rifle has factory swivel mounts for quick detachable sling swivels.

The .50 caliber barrel is 1" octagon and 26" long. The .50 caliber bore is rifled with a 1 in 48" twist to provide good accuracy with a patched round ball, or a Thompson Center .50 caliber Maxi-ball. The bore is bright and has been well maintained. The factory bluing has a few light scratches, mostly around the breech. The barrel is fitted with a bead style front sight and a Thompson Center v-notch rear sight that is screw adjustable for windage and elevation.

The stock is factory finished and has a few minor handling marks from field use. Our top view shows the hooked breech, which can be dismounted by removing the ramrod and wedge key, for easy cleaning. Strong thumb pressure will remove it, no tools are needed. No cheek piece is carved on the T/C Renegade Hunter. The blued iron buttplate is marked with the TC logo.

Our bottom view shows the blued steel triggerguard and walnut stock. A swivel stud is mounted in the bottom of buttstock, positioned forward of the toe. The rear ramrod pipe has been fitted with an integral swivel lug. The 3/8" diameter brown fiberglas ramrod is fitted with a blued steel tip threaded 10-32 to accept loading and cleaning accessories. The ramrod is retained by two round blued steel pipes.

The percussion lock is factory engraved and color case hardened with attractive color. The lock has a crisp action. The lock is retained by a single lock bolt with blued steel washer-style side plate. The single trigger is surrounded by a large trigger bow, to allow the use of a gloved finger when cold weather hunting. The breech is fitted with a 1/4-28 stainless steel Hot Shot nipple for No. 11 percussion caps.

Offered in used condition, this Thompson Center Renegade Hunter rifle is perfect for your next big game hunt. Our customers like these well made American guns, for their reliable service, durable reputation, accuracy, and good value. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20

Part Number:	BALL-50-385
Availability:
Price:	$12.29
Order Quantity:

bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20

Part Number:	BALL-50-MAXI
Availability:
Price:	$14.59
Order Quantity:

.490" round balls, pure lead, Hornady, per 100

Part Number:	BALL-490
Availability:
Price:	$16.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Ball puller, steel screw, .50 caliber brass collar, 10-32 thread

Part Number:	BP-50-10
Availability:
Price:	$3.99
Order Quantity:

Bore brush, bronze, for .50 caliber, 10-32 thread

Part Number:	BRUSH-50-10
Availability:
Price:	$4.29
Order Quantity:

Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash

Part Number:	CAPPER-P
Availability:
Price:	$12.59
Order Quantity:

Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center

Part Number:	FLUSH-RST
Availability:
Price:	$4.99

Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread

Part Number:	FS-50-10
Availability:
Price:	$4.09
Order Quantity:

Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread

Part Number:	JS-50-6-10
Availability:
Price:	$4.59
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$20.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59

Nipple Wrench for Rifles, short style, with slotted end

Part Number:	NW-160
Availability:
Price:	$9.99
Order Quantity:

Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry

Part Number:	OX-15-50-D
Availability:
Price:	$4.99
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread Ramrods cannot be send to a P O Box.

Part Number:	RAMROD-6-10-B
Availability:
Price:	$18.99
Order Quantity:

Ramrod for Thompson Center Renegade, Renegade Hunter, or Big Boar Rifle, 3/8" brown Delrin nylon, 26-5/8" long. Brass tips are threaded 10-32 at rear, 8-32 at front. Made by Track of the Wolf, in our Elk River, Minnesota, we make the brass tips and assemble the ramrod.

Part Number:	RAMROD-265-TC
Availability:
Price:	$26.99
Order Quantity:

Our Strongest Loading & Cleaning Rod, 5/16" stainless, over 29" long for Lyman Trade Rifle or T/C Hawken, rigid handle, 10-32 thread

Part Number:	RAMROD-C-29-10
Availability:
Price:	$31.50

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	RST-I
Availability:
Price:	$4.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel

Cone length 0.440"
Overall length: 0.635"
Thread journal length: 0.195"
Diameter of base: 0.307"

Part Number:	RST-S
Availability:
Price:	$4.99
Order Quantity:

Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.

Part Number:	ST-7
Availability:
Price:	$9.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Percussion guns > Percussion rifles