Kentucky Pistol, .50 caliber, 10" octagon-to-round barrel, small Siler flintlock, walnut, Georgian style brass furniture, by Ken Brady</b.

Home > Guns > Flintlock guns > Flintlock pistols

Kentucky Pistol,
.50 caliber, 10" octagon-to-round barrel,
small Siler flintlock, walnut, Georgian style brass furniture,
by Ken Brady

Part Number:	AAW-142
Availability:
Price:	$2,749.00
Order Quantity:

This Kentucky pistol is stocked in black walnut, with a warm brown tone. This pistol is trimmed in brass Georgian style furniture that appears to be from the late William Kennedy. A few Colonial American makers produced pistols with Georgian style furniture, such as J.P. Beck from Lancaster, Pennsylvania. The brass furniture has a hand burnished tone and nicely compliments the tone of the walnut stock. The octagon-to-round barrel and the small Siler flintlock are finished armory bright. The frizzen has only a few marks from spark testing, and the bright finish has a few scattered speckles from long storage.

The 10" octagon-round barrel has a 4" tapered octagon breech with a single wedding band to round. The .50 caliber bore is rifled with a fast twist for a patched round ball. The bore is bright and has been well maintained. The barrel is fitted with a flat top rear sight on the tang to maximize the sight radius and a silver blade front sight. Also finished bright, the small Siler flintlock has a crisp action and a well hardened frizzen. When using our best 5/8" knapped English gun flints, #FLINT-ENG-5, the lock will throw a shower of sparks into the pan. A stainless steel vent liner is well centered and positioned at the top edge of the pan to provide best ignition.

The walnut stock has a slender grip fitted with a grotesque mask buttcap. The upper grip is fitted with a chiseled brass thumbpiece with scrolls, shells, and flowers. Viewed from above the breech end of the barrel is fitted with a flared tang with a pointed thumbnail finial. The tang is surrounded by a panel of raised carving with a English influenced shell design. The stock is shaped with graceful slender proportions.The triggerguard is correctly mounted by one steel screw and dowel pins. The rear extension has been neatly inlet into the pistol grip. All of the brass furniture is finished to a hand burnished appearance. The buttcap is shaped with a grotesque mask mounted with a iron screw. The slender 5/16" diameter ramrod has a flared brass tip. We recommend using a pistol loading rod, our #PL-50, and leaving this well fitted ramrod with the pistol. Two lock bolts secure the small Siler flintlock to the pistol. The brass sideplate is burnished bright with a chiseled design with banners, scrolls, shells, and flower. The elaborate openwork design is patterned from a antique example, which was designed to show the skill of the inletting by the English gunmakers of the period.

Neatly fitted and finished this light weight Kentucky pistol with its' 18th century styling, will be a delight to carry at the an historical event. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.490" round balls, pure lead, Hornady, per 100

Part Number:	BALL-490
Availability:
Price:	$16.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.59
Order Quantity:

Bore mop, 100% Cotton, for .48 to .50 caliber, 10-32 thread, washable

Part Number:	BORE-MOP-50-10
Availability:
Price:	$3.99
Order Quantity:

Ball puller, steel screw, .50 caliber brass collar, 10-32 thread

Part Number:	BP-50-10
Availability:
Price:	$3.99
Order Quantity:

Bore brush, bronze, for .50 caliber, 10-32 thread

Part Number:	BRUSH-50-10
Availability:
Price:	$4.29
Order Quantity:

English gun flint, 5/8 x 3/4", small Siler, L&R Bailes, CVA, all Thompson Center flintlocks, Lyman Great Plains & Trade Rifles, Pedersoli LePage pistol. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-ENG-5
Availability:
Price:	$2.95

Pack of 12 English Gun flints, 5/8 x 3/4", small Siler, L&R Bailes, CVA, all Thompson Center flintlocks, Lyman Great Plains & Trade Rifles, Pedersoli LePage pistol. We are temporarily limiting purchase of this item to one twelve pack per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-ENG-5-PACK-12
Availability:
Price:	$32.50

Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread

Part Number:	FS-50-10
Availability:
Price:	$4.09
Order Quantity:

Powder Horn, large, 11 to 14", with antique patina finish

Part Number:	HORN-A-L
Availability:
Price:	$74.50

Jag, jagged cleaning tip, brass, .50 caliber, 7/16" rod, 10-32 thread

Part Number:	JS-50-7-10
Availability:
Price:	$4.59
Order Quantity:

Powder measure, brass, adjustable 0 to 50 grains, with spout

Part Number:	MAS-050
Availability:
Price:	$19.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$8.59
Order Quantity:

Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry

Part Number:	OX-15-50-D
Availability:
Price:	$4.99
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Spring steel nipple pick, with bone bead handle

Part Number:	PICK-NIPPLE
Availability:
Price:	$2.99
Order Quantity:

Pistol loading rod and short starter with .50 caliber cleaning jag, 7/16" diameter hickory rod, 10-32 threads, 12" overall usable length including .50 caliber cleaning jag

Part Number:	PL-7-50
Availability:
Price:	$19.58

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Flintlock guns > Flintlock pistols