Tap, high carbon steel, 5/16-32 thread, plug tap
Part Number: TAP-5/16-32-P
Availability: In Stock
Price: $21.99
Order Quantity:
Tap, high carbon steel, 5/16-32 thread, plug tap.

Tap Drill: for 5/16-32 thread, use Letter Drill-I

We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes.

High Speed Steel (HSS) is a special alloy made to retain an edge at "high speed" (i.e. when hot) as a lathe tool bit. Gunsmith taps are turned manually, never run so fast that they get hot. HSS taps are often more costly.

High carbon steel is sharper than HSS High Speed Steel, which contains nickel.

If broken, Track's high carbon steel gunsmithing taps can be fractured and picked out using a prick punch, often with no damaged to the hole or the part.

If broken, HSS taps must be "burned" out, using an EDM (Electro-Discharge-Machine) tap burner, a costly process!

Be sure to order the correct diameter tap drill and clearance drill bits.
Adobe Reader required to view the files below.
Get Adobe Reader
page_119.pdf Last updated:4/25/2012 (102 KB) page_123.pdf Last updated:4/25/2012 (108 KB) page_148.pdf Last updated:8/13/2013 (354 KB)
page_160.pdf Last updated:4/25/2012 (110 KB) page_391.pdf Last updated:4/25/2012 (137 KB) page_397.pdf Last updated:4/25/2012 (88 KB)
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards