Tap, 10-32 thread, high carbon steel, plug tap, to start a blind or through hole
Part Number: TAP-10-32-P
Availability: In Stock
Price: $3.99
Order Quantity:
Tap, high carbon steel, 10-32 thread, plug tap for general threading, or to start a blind hole, with three to five threads chamfered.

Tap Drill: for 10-32 thread, use No. Drill-21
Clearance Drill: for 10-32 thread, use fractional Drill-13/64

We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes.

High Speed Steel (HSS) is a special alloy made to retain an edge at "high speed" (i.e. when hot) as a lathe tool bit. Gunsmith taps are turned manually, never run so fast that they get hot. HSS taps are often more costly.

High carbon steel is sharper than HSS High Speed Steel, which contains nickel.

If broken, Track's high carbon steel gunsmithing taps can be fractured and picked out using a prick punch, often with no damaged to the hole or the part.

If broken, HSS taps must be "burned" out, using an EDM (Electro-Discharge-Machine) tap burner, a costly process!

Be sure to order the correct diameter tap drill and clearance drill bits.
Adobe Reader required to view the files below.
Get Adobe Reader
page_109.pdf Last updated:4/25/2012 (119 KB) page_133.pdf Last updated:4/25/2012 (103 KB) page_397.pdf Last updated:4/25/2012 (88 KB)
drill bit, HSS, 13/64", .2031" diameter, clearance drill No. 10 bolt or screw
drill bit, HSS, 13/64", .2031" diameter, clearance drill No. 10 bolt or screw
Part Number: DRILL-13/64
Availability: In Stock
Price: $3.49
Order Quantity:
drill bit, HSS, Number 21, .1590" diameter, tap drill 10-32 thread
drill bit, HSS, Number 21, .1590" diameter, tap drill 10-32 thread
Part Number: DRILL-21
Availability: In Stock
Price: $2.29
Order Quantity:
Tap, 10-32 thread, high carbon steel, bottom tap, to finish a blind hole
Tap, 10-32 thread, high carbon steel, bottom tap, to finish a blind hole
Part Number: TAP-10-32-B
Availability: In Stock
Price: $3.99
Order Quantity:
Tap, 10-32 thread, high carbon steel, taper tap, to start a through hole
Tap, 10-32 thread, high carbon steel, taper tap, to start a through hole
Part Number: TAP-10-32-T
Availability: In Stock
Price: $3.99
Order Quantity:
Tap handle, accepts #10 to 1/4" diameter taps
Tap handle, accepts #10 to 1/4" diameter taps
Part Number: TAP-W-10
Availability: In Stock
Price: $9.99
Order Quantity:
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards