Our forward pipe, with lug for pin, is 3/4" overall length. Made for a fullstock pistol (with wood extending to muzzle), most pistols use only one forward pipe. Use one, or sometimes two #PIN-3/32 steel dowel pins, to retain a brass pipe.
DRILL-3/32
drill bit, HSS, 3/32", .0938" diameter, drill for 3/32" pins
PIN-3-32
Steel Dowel Pin, 3/32" diameter, 1-1/4", hardened, for lug, pipe, guard, or trigger pivot pin
RP-IH-PE-5-B
Ramrod pipe, brass, pistol entry pipe with skirt, octagon with ringed ends, for 5/16" ramrod
RP-IH-PE-5-I
Ramrod pipe, steel, pistol entry pipe with skirt, octagon with ringed ends, for 5/16" ramrod
RP-IH-PE-6-B
Ramrod pipe, brass, pistol entry pipe with skirt, octagon with ringed ends, for 3/8" ramrod
RP-IH-PE-6-I
Ramrod pipe, steel, pistol entry pipe with skirt, octagon with ringed ends, for 3/8" ramrod
RP-IH-PF-5-I
Ramrod pipe, steel, pistol forward pipe with pin lug, octagon with ringed ends, for 5/16" ramrod
RP-IH-PF-6-B
Ramrod pipe, brass, pistol forward pipe with pin lug, octagon with ringed ends, for 3/8" ramrod
RP-IH-PF-6-I
Ramrod pipe, steel, pistol forward pipe with pin lug, octagon with ringed ends, for 3/8" ramrod
SOLDER-SB
Solder & Flux,
Stay-Brite brand,
higher strength, low 430 melting point
Adobe Reader required to view the files below.
page_236.pdf
Last updated: 4/25/2012 (187 KB)