This stock has mineral streaks across the buttstock and wrist. This stock would normally be priced at $179.00, but is offered at a discount. The streak is only a cosmetic defect, the wood is solid not soft and punky. Staining the stock a darker color will help mask the discolored wood. Small defects such as this can often be found on original guns.
Shaped but not mortised for a lock, this Hawken fullstock is modeled after the early work of Jacob and Samuel Hawken, with an early square cheekpiece, not the later beavertail found on halfstocks. We strongly recommend straight grain maple for large bores. Shaped for a right hand shooter, with 1” straight octagon barrel channel. The stock will accept barrels up to 38" in length.
Shaped but not mortised for a lock, this Hawken fullstock is modeled after the early work of Jacob and Samuel Hawken, with an early square cheekpiece, not the later beavertail found on halfstocks. We strongly recommend straight grain maple for large bores. Shaped for a right hand shooter, with 1” straight octagon barrel channel. The stock will accept barrels up to 38" in length. All have 7/16” ramrod hole drilled full depth, and a shaped forend. The buttplate is uncut. Order our Hawken plans to help layout and design this project.
Drop is about 3-1/2” from the line of sights. The stock is not cut for a buttplate, so you may adjust the trigger reach, up to about 15” length. The butt end is about 4-15/16” x 1-5/16”, for our early wide Hawken buttplate. This fullstock has the correct early Hawken style square cheekpiece, not the later Hawken beavertail cheek.
Specifications for non-inlet stocks:
Drop and trigger reach: drop is 3-1/2" from the line of sights to heel, at 15" of pull
Barrel channel size: 1" straight octagon, up to 38" length
Butt end: 1-5/16" wide by 4-15/16" high, not cut for buttplate
Lock & Trigger: uncut
Ramrod hole & groove: 7/16" diameter, drilled full depth