C.V.A. Mountain Pistol .50 caliber, 9" barrel, percussion, beech, iron trim, belt hook, used, well finished from a kit, by Connecticut Valley Arms

Home > Guns > Percussion guns > Percussion pistols & revolvers

C.V.A. Mountain Pistol
.50 caliber, 9" barrel,
percussion, beech, iron trim, belt hook,
used, well finished from a kit, by Connecticut Valley Arms

Part Number:	AAW-062
Availability:

Constructed from one of CVA's popular kits, this Mountain pistol is trimmed in iron and stocked in beech. The stock was nicely finished to a medium color, and the limited amount of iron furniture on the pistol was polished and browned. This pistol is fitted with a long browned iron belt hook, which also doubles as the sideplate. The .50 caliber bore is bright and has been well maintained. This pistol weighs 2.6 pounds and points naturally. This pistol comes with its original factory carton, which we note is ripped and tattered.

When viewed from above the 9" long .50 caliber barrel can be seen. The barrel is finished to a smooth chocolate brown. The bore is bright, clean, and ready to shoot. Fitted with a flat top rear sight dovetailed 2-1/2" forward of the breech, the barrel also has a nickel silver blade front sight set in an iron base dovetailed 1" behind the muzzle. The barrel is marked on the left hand flat Connecticut Valley Arms, Inc. along with a black powder warning, caliber stamp and serial number. The breech end of the barrel is fitted with a hooked breech to allow easy cleaning. Simply press the key out, remove the ramrod and, with the lock in the half cock position, lift the barrel out of the stock. This allows for quick cleaning of the gun and makes maintenance that much easier.

The beech stock has been finished a medium brown and has a few minor handling marks. Our bottom view of the pistol shows the iron triggerguard, held in position by two screws. The poured pewter forend doubles as a ramrod entry pipe. Originally polished bright, it has aged to a dull gray. The ramrod has 10-32 threads for cleaning accessories. We would suggest using a larger diameter pistol cleaning and loading rod for maintenance, see our #PL-7-50

Ignition is provided by the factory supplied percussion Maslin lock. Lightly engraved the lock has been color case hardened and has a strong mainspring. When combined with the properly pinned and tuned trigger, the lock has fast time and will ensure a quick ignition. The percussion drum is fitted with a 6-1mm threaded nipple, order our #CVA-S if you need a spare.

A used, but well maintained C.V.A. Mountain pistol with a bright bore that is ready to shoot. It will look good hooked onto your belt or sash at your next reenactment. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.490" round balls, pure lead, Hornady, per 100

Part Number:	BALL-490
Availability:
Price:	$16.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.19
Order Quantity:

Bore mop, 100% Cotton, for .48 to .50 caliber, 10-32 thread, washable

Part Number:	BORE-MOP-50-10
Availability:
Price:	$3.29
Order Quantity:

Ball puller, steel screw, .50 caliber brass collar, 10-32 thread

Part Number:	BP-50-10
Availability:
Price:	$3.99
Order Quantity:

Bore brush, bronze, for .50 caliber, 10-32 thread

Part Number:	BRUSH-50-10
Availability:
Price:	$3.19
Order Quantity:

Nipple, 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, #11 CCI cap, stainless steel

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	CVA-S
Availability:
Price:	$4.99
Order Quantity:

Flush Nipple, 6-1mm thread for Spanish rifles, stainless steel, 1/4" square shank for nipple wrench, with tubing, fits CVA, Jukar, Traditions, Ardessa, Dikar

Part Number:	FLUSH-CVA
Availability:
Price:	$4.99
Order Quantity:

Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread

Part Number:	FS-50-10
Availability:
Price:	$4.09
Order Quantity:

Powder Horn, large, 11 to 14", with antique patina finish

Part Number:	HORN-A-L
Availability:
Price:	$74.50

Jag, jagged cleaning tip, brass, .50 caliber, 7/16" rod, 10-32 thread

Part Number:	JS-50-7-10
Availability:
Price:	$4.59
Order Quantity:

Powder measure, brass, adjustable 0 to 50 grains, with spout

Part Number:	MAS-050
Availability:
Price:	$19.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$7.99
Order Quantity:

Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry

Part Number:	OX-15-50-D
Availability:
Price:	$4.79
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Spring steel nipple pick, with bone bead handle

Part Number:	PICK-NIPPLE
Availability:
Price:	$2.99
Order Quantity:

Pistol loading rod and short starter with .50 caliber cleaning jag, 7/16" diameter hickory rod, 10-32 threads, 12" overall usable length including .50 caliber cleaning jag

Part Number:	PL-7-50
Availability:
Price:	$19.58
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Percussion guns > Percussion pistols & revolvers