Investarm Hawken Rifle .50 caliber, 28" barrel, percussion, walnut, brass, used

Home > Guns > Percussion guns > Percussion rifles

Investarm Hawken Rifle
.50 caliber, 28" barrel,
percussion, walnut, brass, used

Part Number:	AAV-918
Availability:

This nice .50 caliber Invest Arm Hawken percussion rifle is ready to shoot. This rifle is very similar is shape to rifles produced by Thompson Center. This factory finished rifle is stocked in European walnut, with brass furniture, and blued 28" barrel. Weight is 8.7 pounds, and with a trigger reach of 14-1/8 inches, the rifle is perfectly setup for today's typical to large man size shooter. This rifle is in excellent condition and does not appear to have seen much use. .

The factory polished blued barrel is .50 caliber, 15/16" octagon, 28" length. In very good condition the bore is clean and ready to go, with crisp rifling grooves. We recommend our .490" round ball, .015" patch, and Mink Oil tallow patch lubricant, over a charge of 70 grains of GOEX FFg black powder. The barrel is fitted with a bead front sight, with painted orange bead, and elevation and windage adjustable rear sight.

The walnut stock has been finished with a satin varnish. The stock has a few small handling marks. The brass furniture has started to age to a mellow patina. The buttstock is fitted with a large oval capbox. All the furniture is mounted with blued steel screws in period fashion. The beaver tail cheek piece is shaped for a right hand shooter.

The hooked breech allows the barrel to be easily dismounted for cleaning without risk of wetting the stock with water containing black powder residue. To dismount the barrel, put the lock on half cock, withdraw the ramrod, drift the key past the underlug, and the barrel can be lifted from the barrel channel for ease of cleaning. Remove the nipple and place the breech end of the barrel in a bucket of soapy water. Run a wet patch down and up the bore, the pumping action will flush all the fouling from the barrel. Once the bore is clean, run a dry patch down the bore to pick up any moisture followed by a oily patch. Dry and oil the exterior then reassemble the rifle.

The color case hardened percussion lock is factory engraved. The lock plate is neatly finished, inlet flush with the wood. The breech is fitted with a 6-.75mm threaded nipple. Order our #RLP-S if you need a spare. Double lever double set triggers are well adjusted, to fire set or unset. When the rear trigger is set (latched), the front trigger has a hair-trigger release. The adjustment screw between the triggers allows even finer or coarser adjustment, as desired. Or, turn the screw fully inboard, to disable the set trigger feature, when hunting in very cold weather.

Used with a bright bore and a few small handling marks on the stock. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

bullets, .50 caliber, Hornady Great Plains, 385 grain, pure lead, hollow base, hollow point, per 20

Part Number:	BALL-50-385
Availability:
Price:	$12.19
Order Quantity:

bullets, .50 caliber, T/C Maxi-Ball, hand cast pure lead, about 378 grains, per 20

Part Number:	BALL-50-MAXI
Availability:
Price:	$14.59
Order Quantity:

.490" round balls, pure lead, Hornady, per 100

Part Number:	BALL-490
Availability:
Price:	$16.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.19
Order Quantity:

Ball puller, steel screw, .50 caliber brass collar, 10-32 thread

Part Number:	BP-50-10
Availability:
Price:	$3.99
Order Quantity:

Bore brush, bronze, for .50 caliber, 10-32 thread

Part Number:	BRUSH-50-10
Availability:
Price:	$3.19
Order Quantity:

Brass Capper, for No. 11 caps, straight line, made in the USA, by Tedd Cash

Part Number:	CAPPER-P
Availability:
Price:	$12.59
Order Quantity:

Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread

Part Number:	FS-50-10
Availability:
Price:	$4.09
Order Quantity:

Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread

Part Number:	JS-50-6-10
Availability:
Price:	$4.59
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$20.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$7.99
Order Quantity:

Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry

Part Number:	OX-15-50-D
Availability:
Price:	$4.79
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread Ramrods cannot be send to a P O Box.

Part Number:	RAMROD-6-10-B
Availability:
Price:	$18.99
Order Quantity:

Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken, 3/8" brown Delrin nylon, 28-5/8", flared brass tip, threaded 8-32 at front, 10-32 at rear. Made in the USA by Track of the Wolf, Elk River, Minnesota.

Part Number:	RAMROD-285-TC
Availability:
Price:	$26.99
Order Quantity:

Ramrod for Thompson Center Hawken, Cabela's Hawken, Investarm Hawken, 3/8" stained hickory, 28-5/8" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made by Track of the Wolf, in Elk River, Minnesota.

Part Number:	RAMROD-285-TC-H
Availability:
Price:	$30.99
Order Quantity:

Nipple, 6-.75mm metric thread, for InvestArms, Cabela's Hawken rifles, #11 CCI cap, stainless steel

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	RLP-S
Availability:
Price:	$5.99
Order Quantity:

Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.

Part Number:	ST-7
Availability:
Price:	$9.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Percussion guns > Percussion rifles