Northwest Trade Gun, 24 gauge, 30" tapered octagon-to-round barrel, L&R flintlock, walnut, brass tacks, new, unfired, by J.A. Wymore

Home > Guns > Flintlock guns > Flintlock smooth bore guns

Northwest Trade Gun,
24 gauge, 30" tapered octagon-to-round barrel,
L&R flintlock, walnut, brass tacks,
new, unfired, by J.A. Wymore

Part Number:	AAW-071
Availability:

This classic North West Trade Gun has been stocked in walnut with nice figure. Fitted with traditional styled trade gun hardware in a mixture of brass and iron furniture. This .58 caliber smooth bore ( 24 gauge) flint fowling gun is as pretty as it is functional. Ideal for competition, this nice flint fowling gun is fully qualified for use in the NMLRA North West Trade Gun match, using patched round balls at paper targets, and bird shot at clay birds on the trap range. Neatly hand made by contemporary builder J.A. Wymore. Trigger reach is 13-5/8" to fit today's average size shooter. Weight is a modest 5.9 pounds.

The 30" barrel is tapered octagon, with a transition to sixteen flats, two wedding bands, and tapered round to the muzzle. The bore is .580" diameter, for our cast lead round ball and patch. We recommend our .550" pure lead round ball, patched with .015" Ox-Yoke patches, lubricated with Ox-Yoke Wonder Lube, for easy loading. We offer 24 gauge (.58 caliber) wads, cards, and shot for wing shooting. This trade gun has no rear sight, allowing it to qualify under NMLRA Trade Gun Match rules. The octagon-to-round barrel is nicely finished to a dark brown and the left oblique flat is signed JAW 147 near the breech. The top flat of the barrel is marked with a Sitting Fox in a Circle, inspection mark, and stamped LONDON, which was a historic mark of quality even though most Trade Guns were manufactured in Birmingham, England. A brass front sight is soldered 1" behind the muzzle. The straight tang of the breech plug has a single bolt that passes through the stock to engage the trigger plate below. Three brass pins retain the barrel to the forearm.

Newly made this North West Trade Gun is finished to a warm brown with a golden undertone. The furniture is a correct mixture of brass and iron. The traditional style square buttplate, serpent sideplate, and ramrod pipes are all made of brass, while the triggerguard is iron. The buttstock and forearm are accented with domed brass tacks. A cross made from brass tacks decorates both sides of the buttstock near the upper corner. The buttplate is secured with multiple screws, as seen on original trade guns. The bottom view shows the large iron triggerguard, browned to match the barrel and correctly surface mounted. Two screws retain the rear of the triggerguard, and a third retains the front. The ramrod pipes and matching entry pipe are thin brass, with embossed grooves, much like the corrugations in cardboard, to give the pipes maximum strength against crushing or denting in hard use. The pipes allow the 3/8" ramrod to slide smoothly, to serve the barrel. The ramrod is fitted with an iron tip with 8-32 threads for loading and cleaning accessories. The brass sideplate is cast in the form of a serpent, a traditional motif for the North West Gun. We believe that this stylized serpent sideplate evolved from the flat sideplates, embossed or engraved to resemble a serpent, found on Queen Anne and later English Sea Service muskets. Two lock bolts retain the sideplate and pass through the stock to engage the lock on the opposite side.

The L&R Queen Anne style flint lock has a round faced cock and plate, rounded frizzen and pan surfaces. Early English fowlers of the 1730 - 1770 era commonly used locks of this style. This lock has a dark brown finish to match the barrel. The lock plate is marked with a Sitting Fox in a Circle, and the tail is marked WHATELY. We recommend that you order a dozen #FLINT-ENG-7 gun flints for this lock. An essential element for fast ignition, the stainless steel vent is centered on the pan, correctly positioned above the bottom of the pan, to serve as a window, centered on the heat of the incandescent flash. The single trigger provides a smooth release of the lock.

In as-new unfired condition this North West Trade Gun is light weight with a handy length barrel. It will be perfect for your next reenactment or hunting trip. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.550" round balls, pure lead, hand cast, per 50

Part Number:	BALL-550-X
Availability:
Price:	$15.49
Order Quantity:

.562" round balls, pure lead, hand cast, per 50

Part Number:	BALL-562-X
Availability:
Price:	$16.69
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.19
Order Quantity:

Ball puller, steel screw, .58 caliber brass collar, 8-32 thread

Part Number:	BP-58-8
Availability:
Price:	$4.29
Order Quantity:

English gun flint, 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-ENG-7
Availability:
Price:	$3.50
Order Quantity:

Pack of 12 English Gun flints 7/8 x 1", Fowler, Jaeger, Tulle, Twigg, Hatfield, Chambers. We are temporarily limiting purchase of this item to one twelve pack per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-ENG-7-PACK-12
Availability:
Price:	$39.60
Order Quantity:

Fouling Scraper, flat face, brass, .58 caliber, 8-32 thread

Part Number:	FS-58-8
Availability:
Price:	$4.79
Order Quantity:

Jag, jagged cleaning tip, brass, .58 caliber, 7/16" rod, 8-32 thread

Part Number:	JS-58-7-8
Availability:
Price:	$5.09

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$20.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$7.99
Order Quantity:

Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry

Part Number:	OX-10-50-D
Availability:
Price:	$4.79
Order Quantity:

Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry

Part Number:	OX-15-50-D
Availability:
Price:	$4.79
Order Quantity:

Shooting patches, .018" pillow ticking, .50 - .59 caliber, per 100, dry

Part Number:	OX-18-50-D
Availability:
Price:	$5.29
Order Quantity:

Ramrod, 7/16" hickory, 48" long, brass tip, 8-32 thread

Part Number:	RAMROD-7-8-B
Availability:
Price:	$19.99
Order Quantity:

Buckshot #4 .240" round balls, lead, by Hornady, 5 pounds

Part Number:	SHOT-4
Availability:
Price:	$36.99
Order Quantity:

24 gauge, .589" ideal for .579" bore, .125" over powder card, 1000, by Circle Fly Wads

Part Number:	WAD-24-A
Availability:
Price:	$12.69
Order Quantity:

24 gauge, .589" ideal for .579" bore, .025" over shot card, 1000, by Circle Fly Wads

Part Number:	WAD-24-B
Availability:
Price:	$12.69
Order Quantity:

24 gauge, .589" ideal for .579" bore, .500" thick fibre wad, 500, by Circle Fly Wads

Part Number:	WAD-24-C
Availability:
Price:	$12.69
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 8-32 thread

Part Number:	WORM-CORK-8
Availability:
Price:	$6.89

Top of Page Home > Guns > Flintlock guns > Flintlock smooth bore guns